Simplify the installation of your 1-Wire network with these high-quality M12 connectors and cables. Start by installing the M12 3-Pin female panel mount connector in your control panel. The M12 T-Connector splitter makes it easy to daisy-chain your sensors. Use 2' and 6' M12 cables to connect it all together or use M12 assembly connectors to make your own cables. To complete the solution OSCSYS offers assembled 1-Wire temperature probes with M12 connectors or use M12 3-Pin 2ft Probe End Cables to make your own DS18B20 probes.
M12 3-Pin female panel count connector, Rear mount, Chassis side thread, With O-Ring, Solder lugs
- Standard: IEC 61076-2-101 M8/M12 circular connectors for automation systems
- Certification: UL, CE
- Rated voltage: 250V AC/DC, 60V AC/DC, 30V AC/DC
- Insulation resistance: >20MΩ
- Rated current: 4A, 1.5A
- Contact resistance: ≤5mΩ
- Ambient temperature: -25℃ ~ +90℃
- Contacts: Brass with gold plating
- Insert: PA + GF
- Coupling nut/screw: Brass with nickel plating
- Degree of protection: IP67/ IP68
|
