1/8" ID Silicone Tubing

This tubing is designed to work with the MPX5010DP pressure sensors for BrewTroller volume sensing. You can use this tubing near hot kettles and not have to worry about it sticking or melting. It's also very soft so it makes a good seal with the sensor and pipe nipples.

It is recommended to use pipe clamps with this tubing to ensure nothing comes loose.

Tubing is cut to length so if you need 10 ft then order qty 10.

Specifications

• ID = .125" (1/8")
• OD = .250 (1/4")
• Max Pressure = 20PSI @ 72F
• Max Temp = 392F